June 8, 2009

Whats new @ 949Racing

May 5, 2009

The new V3 end links are here

Not satisfied with the the end links available from other suppliers, I decided to make my own. The rod ends, coupler and tapered washers are designed just for these links. Stock ride height to 4.5" pinch weld height, these have enough length adjustment range.

April 4, 2009

M-Tuned Big Rotor Kit

This adapter kit allows you to swap to 11" VW Corrado rotors to your Miata for a big increase in fade resistance and power. Uses your same pads and calipers, bolts on in minutes. Comes with all the hardware you need except rotors for only $99!

Tubular control arms

Ok yes, they're really sexy but they definitely make your Miata handle better. 3lbs lighter per corner, increased camber adjustment, hard urethane bushings, low friction rebuidable ball joint. Made in USA by V8Roadsters form TIG and MIG DOM steel, 5 stage powdercoated.

April 2, 2009

M-Tuned coolant reroute   90-05 Miata

Complete reroute kit allows you to mount the billet remote thermostat housing and transfer hose wherever you want.. Get ready for summer!

6ULR   coming late 2009

Roll forming is a process that draws the outer bell out of a molten blank which results in a very uniform, super light and strong outer rim with aligned grain structure like a forged wheel. For reference, the much vaunted roll formed RPF1 uses a standard gravity cast center where the 6ULR goes a step further with the low presure cast center. Expect the 6ULR to cost about $50 more per wheel than the 6UL, weigh over a pound less and be even stronger. 949Racing will offer both the 6UL and 6ULR. There will be some other very trick features on the 6ULR that I'll share as development and testing is completed.

Tentative 6ULR sizes

15x7 +40 4x100  9.8lbs

15x7.5 +40 4x100 10.4 lbs

17x9 +63 5x114.3 16.5 lbs  S2000

17x10 +73 5x114.3 17.8 lbs  S2000