949Racing end links

90-05 Miata  

 949Racing adjustable end links for the 90-05 Miata allow you to remove any preload from your standard or aftermarket anti-roll bars. You can also fine tune the length so the angle of the link is a vertical as possible with the car at resting ride height. Proprietary PTFE coated rod ends, designed just for these end links. Urethane end links will bind at full compression which changes the effective anti-roll bar rate, (not good). 

 

If you're shopping around for end links, be sure whatever you choose will adjust shorter than OE 105mm link which is designed for 13.5~14"  ride height. Otherwise, your big aftermarket sway bar may contact the upper control arm and the end link to sway bar geometry will be compromised when you lower your car. These links are designed to solve both problems, having the correct adjustment range to handle all useable ride heights and oversize sway bars. 

Order qty  "1" gets you two links, enough for one sway bar. Order  qty "2" for the whole car.

• Proprietary PTFE coated bushing, heat treated, hard chromed ball, rod ends
• CNC 6061-T6 anodized aluminum counter threaded turnbuckles
• Special chamfered spacers increase maximum angularity
• Seals-It seals included
• 92-113mm adjustment length works with stock ride height to 2.25" drop (4.25" sill height)
• Turnbuckle style center so you can adjust the length without removing the links
• Fits all sway bars
• 17mm wrench fits everything including turnbuckle for fast adjustments at the track
• 10.9 hardware included

End Link Installation Instructions