Innovate LM-2 3806

Innovate Motorsports

Innovate Wideband LM2 3806
Innovate Wideband

Your price: $399.00

Personalization

* denotes required field

options*

Quantity:

Add to a new shopping list

Detailed Description

Innovate LM-2 controller with Wideband O2

complete kit as shown

The LM-2 Kit (Single Wideband O2) includes

LM-2 meter
Bosch wide-band oxygen sensor
8 ft sensor cable
Cigarette-lighter power adapter
Analog in/out cable
OBD-II/CAN interface cable
2GBSD memory card
USB cable for PC connection
Weld-in bung and plug
LogWorks software CD
Quick-start guide
Carrying Case

The LM-2 is the industry's best complete wideband tuning system. A single self-contained unit combines a wideband air/fuel ratio sensor controller, a 6-channel data logger, and an easy-to-read backlit LCD display. This is the unit used by tuners, racers, and engine builders the world over.

Tuning an engine for maximum power previously required long trial-and-error sessions on a dynamometer. With the LM-2, precise AFR measurement allows the user to correctly adjust many variables- including carburetor jetting, fuel injection, turbo fuel curves, etc.- without long and expensive dyno sessions. The meter’s digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.

Key Features

World's only fully-digital wideband controller.

Up to 6 Channels of data logging.

Portable/ Handheld.

Display both A/F and Lambda readings in real-time.

Auto calibration to compensate for changes in temperature, altitude, and sensor condition.

Two user configurable analog outputs.

LogWorks - award winning tuning software included

The LM-2's analog outputs are compatible with dynamometer software, gauges, or virtually any brand of Data Acquisition hardware, such as:

Accel
AEM
Advanced Racing Technologies
Advantage Motorsports
AiM Sports ( MyChron)
Altronics
Autometer
EFI Technology
Electromotive
Engine Management Systems

Fuel Air Spark Technology (FAST)

FXL Data

Haltech Engine Management Systems
Link ECU
Microtech
MoTeC
Pi Research
Powertrain Control Solutions
Powertrain Electronics
Race Technology
Racepak
RPM Performance
SPA Technique
Stack
Traqmate

The instrument can sample and store 6 channels of data- air-fuel-ratio and up to 5 other sensor data channels- internally in operation for later analysis on a personal computer. At a sampling rate of 12 samples/second the instrument can store up to 44 minutes worth of data in non-volatile memory. The data can be downloaded to a personal computer using a standard serial port and viewed/analyzed by the included LogWorks software or any standard spreadsheet program:

The LM-1 also features two analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 1 volt = 10 AFR (.6 lambda) and 2 volts = 20 AFR (1.3 lambda). With the provided LM Programmer software these analog outputs may also be configured by the user.

The LM-2 is available in various kit configurations:

The RPM Kit ($429) is comprised of the basic kit plus the LMA-2 (RPM Converter.) This cable contains a circuit to convert a tach signal into an analog RPM signal that can be logged by the LM-1. This cable also has 4 additional terminal screws to tap into and log other 0-5 V analog sensors from your vehicle.

The AuxBox Kit ($589) is comprised of the basic kit plus the LMA-3 (AuxB ox) input Expander Cable. The AuxBox will give you the choice of picking sensors existing from the vehicle or use the 5 internal sensors. The five internal sensors are: RPM conversion (from a tach signal or inductive clamp), Manifold Air Pressure (MAP or Boost), Cylinder Head Temperature (CHT) or Exhaust Gas Temperature (EGT), Acceleration, and Injector Duty Cycle (Dwell). Read more about the LMA-3 (AuxBox)

The LM-2 is also a key component of Innovate Motorsports' Modular Tuning System (MTS). Using the LC-1's serial ports you can daisy-chain other Innovate devices such as the XD-16, AuxBox (LMA-3), DL-32, TC-4, and SSI-4.

Installation and Setup

Installation of the LM-2 is relatively simple. Complete documentation is supplied, and the support pages, user forum, videos, application notes and tuner resources can also speed you on your way to effective tuning. Innovate also has a great network of local dealers, tuners, race shops, and dyno shops that can assist you in choosing, installing, and getting the most out of your Innovate products.

Product Reviews

(0 Ratings, 0 Reviews)