Light Weight Flywheel For 1.6 Mazda 200mm clutch
Flywheel can be used with a 1.6 clutch and bolted to 1.8L Miata engine for improved response
- Made in USA
- 6061 T6 Aluminum
- 4340 billet steel friction ring
- 7.8 lbs – (stock 17 lbs)
- Chamfered ring gear for smooth starter engagement
- Exceeds SFI 1.1 Specification
- Pre -balanced, ready to install
- Does not require special fasteners – reuse your OEM pressure plate and flywheel bolts
- Works with any brand OEM-style 1.6 Miata clutch
Make your engine super fast revving. This is my favorite Miata modification because it wakes up the engine response so well. Makes heel toe rev-matched downshifting much easier. You may experience some increase in drive train noise at idle and on deceleration. Driveability is very good, no problem taking off from a dead stop.
NOTE: This flywheel will only bolt to a 200mm 1.6 clutch. 225mm 1.8 clutch will not fit this flywheel.